Instruments
Corporate
UNI-T News & Information
Meters
General Meters, Environmental Testers & Other Meters
Instruments
Oscilloscopes, Waveform Generators & Other Instruments
Thermal Imaging
Handheld Thermal Cameras & Others Thermal Cameras

UTE9800 SERIES

The UTE9800 Series intelligent electric parameter measuring instrument, also known as digital power meter, is an economical and por table measuring instrument. It is a multifunctional measuring instrument integrating voltage, current, power, power factor and frequency. It has high cost performance and is widely used in many fields such as production, testing, quality and scientific research.

3.0V~600V
VOLTAGE RANGE
0.5mA~20.0A
CURRENT RANGE
40Hz~130Hz;BW 5kHz
FREQUENCY RANGE
± (0.4% reading + 0.1 range + 1 digit)
ACCURACY
AC,DC,AC+DC
MEASUREMENT MODE
RS-232/RS-485
CONNECTIVITY
½ 2U
SIZE
VA LCD
DISPLAY
Four-window display

Four-window display

Four windows simultaneously display voltage, current, power, power factor/frequency, UTE9811 has voltage crest ratio and current crest ratio. 5-digit high-precision display

Harmonic measurement

Harmonic measurement

UTE9811 adopts phase locked loop (PLL) synchronization method, and the maximum harmonic analysis is 50 times


True RMS measurement

True RMS measurement

UTE9802 true RMS measurement. Can measure AC、DC、AC+DC


Remote control

Remote control

It is equipped with RS232 port and supports remote control

Effortless to build

Effortless to build

Optional test cable, easy to build measurement environment

UTE9811

VOLTAGE RANGE:3.0V~600V
CURRENT RANGE:5mA~20.0A
FREQUENCY RANGE:40Hz~70Hz;BW 5kHz
ACCURACY:± (0.4% reading + 0.1 range + 1 digit)
MEASUREMENT MODE:AC
CONNECTIVITY:RS-232/RS-485
SIZE:½ 2U
DISPLAY:VA LCD
Add to Compare

UTE9802

VOLTAGE RANGE:3.0V~600V
CURRENT RANGE:0.5mA~20.0A
FREQUENCY RANGE:40Hz~130Hz;BW 5kHz
ACCURACY:± (0.4% reading + 0.1 range + 1 digit)
MEASUREMENT MODE:AC,DC,AC+DC
CONNECTIVITY:RS-232/RS-485
SIZE:½ 2U
DISPLAY:VA LCD
Add to Compare
USER MANUAL
download

UTE9800 User's Guide

Version:V1.0
Release Date:2022.07.01
DATASHEETS
download

UTE9800 Datasheet

Version:V1.0
Release Date:2022.07.1
PROGRAMMING MANUAL
download

UTE9811 Programming Manual

Version:V1.0
Release Date:2022.07.01
download

UTE9802 Programming Manual

Version:V1.0
Release Date:2022.07.01
ACCESSORIES
Model
Description
Price
Manual Download
3C
3C
Power cable
SOFTWARE
Name
Version
Release Date
Download
UTE9800 Software
V1.0
2022/07/01
download
No screen display(blank screen)

If the generator still remains blank screen when power on.

1) Check whether the power supply is connected properly.

2) Check whether the power switch on the rear panel is set to "I".

3) Check whether the power switch on the front panel is connected .

4) Restart the instrument.

5) If the instrument still can't work normally, please contact your UNI-T dealer or local offices for support.



No waveform output

Correct settings but no waveform output

1) Check whether the BNC cable is properly connected to the channel output.

2) Check whether the key CH1 or CH2 is turned on.

3) Save the current settings of the instrument to a USB flash drive and "restore factory settings",  then restart the instrument.

4) If the instrument still can't work normally, please contact your UNI-T dealer or local offices for support.


Can not recognize U disk

1) Check whether the USB flash drive device is working properly.

2) Make sure you are using Flash type USB flash drive device, this instrument does not support hard disk type USB flash drive device.

3) Restart the instrument and insert the USB flash drive again to see if it works properly.

4) If the USB flash drive still can not be recognized, please contact UNI-T dealer or local office and let us serve you.


Maintenace and Cleaning

(1) General Maintenance 

Do not store or put the instrument under direct sunlight for a long time, especially the LCD display panel. Caution:  Sprays, liquids or solvents are not allowed for the instrument or probe  to avoid damage to the instrument or the probe. 

(2) Cleaning 

Check the instrument and probe frequently according to the operating conditions. Fellow the steps to clean the surfaces of the instrument.


Please use a soft cloth to wipe dust on the surface of the instrument and probe. When cleaning the LCD panel, be careful not to scratch the transparent protective film. 


Power off the instrument first and wipe the instrument with a soft cloth.Use a mild detergent or water to clean if necessary.


Do not use any abrasive chemical cleaners as they may damage the instrument or the probe. 


Warning: Make sure the instrument is completely dry before rebooting. Moisture may cause electrical short-circuit or even personal injury!



This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.