This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.
UNI-T MSO6000HDP Series | 12-Bit Oscilloscopes up to 2 GHz

UNI-T Launches MSO6000HDP Series 12-Bit Mixed Signal Oscilloscopes with Up to 2 GHz Bandwidth

Up to 10 GSa/s sample rate and 1 Gpts memory depth, plus jitter, power, and compliance analysis in a single instrument.

Faster edge rates and tighter margins in embedded, automotive, and power electronics applications demand higher vertical resolution and standards-based verification.

Front view of a UNI-T MSO6000HDP Series oscilloscope displaying waveforms and measurement results

The UNI-T MSO6000HDP Series High-Resolution Mixed Signal Oscilloscopes address both requirements on a four-analog, 16-digital-channel platform that takes you from first signal capture to compliance verification on a single instrument.

Which models are available in the MSO6000HDP Series?

The series includes two models: MSO6204HDP (2 GHz) and MSO6104HDP (1 GHz).

Model Bandwidth Max. Sample Rate Max. Memory Depth
MSO6204HDP 2 GHz 10 GSa/s 1 Gpts
MSO6104HDP 1 GHz 10 GSa/s 1 Gpts

Key Features

1. All-in-One Measurement Platform

The MSO6000HDP Series integrates multiple measurement and analysis functions into a single instrument. Built-in capabilities include an oscilloscope, 16-channel logic analyzer, FFT spectrum analysis, digital voltmeter (DVM) and frequency counter. An optional dual-channel 50 MHz function/arbitrary waveform generator also supports Bode plot (loop response) analysis.

MSO6000HDP all-in-one platform diagram showing oscilloscope, logic and spectrum analysis, waveform generation, protocol and timing analysis, power analysis, jitter and eye diagrams, and Bode plots

Software options provide:

  • Serial trigger and decode for automotive, aerospace and other buses (15 protocols supported in total, including both standard and optional protocols.)
  • Dual-channel 50 MHz function/arbitrary waveform generator with Bode plot analysis
  • Power and timing analysis
  • Jitter and eye diagram analysis
  • Automated USB 2.0, 100BASE-TX and 1000BASE-T compliance testing with report export

2. Advanced Power Analysis

The MSO6000HDP Series provides power analysis tools including SOA, modulation, ripple, turn on/off time, inrush current, RDS(on), slew rate, efficiency, power quality, harmonics, switching loss, and transient response.

MSO6000HDP power analysis display with voltage and current waveforms and a table of measurements
Power analysis from input power quality through switching behavior to output response

3. Protocol Compliance Testing with Report Export

Automated compliance test applications for USB 2.0, 100BASE-TX, and 1000BASE-T perform the specified measurements, compare each result against the limits defined in the standard, and export a pass/fail report. The outcome is a shorter validation cycle and a documented pre-compliance record that design teams can review before formal certification testing.

Sample exported USB 2.0 compliance report showing the overall result and individual test results MSO6000HDP USB 2.0 compliance screen displaying an eye diagram, its test mask, and the acquired waveform
Reduces validation effort, accelerates design verification

4. Comprehensive Protocol Analysis

Trigger and decode are available for 15 serial protocols, including standard and optional protocols, used in computing, embedded, automotive, aerospace, and audio designs. Engineers can verify timing consistency and trace a synchronization fault to a specific bus transaction.

MSO6000HDP ARINC 429 decode screen with annotated bus waveforms and a decoded frame table
Decoded bus content is shown alongside the analog and digital waveforms

5. Mixed Signal Debugging

Four analog inputs and 16 digital channels can be displayed and analyzed together, and a dedicated external trigger input accepts signals from outside the four analog channels. Trigger conditions are configured per channel, which keeps mixed-signal debug setups repeatable across sessions.

MSO6000HDP mixed signal waveform display with multiple digital traces and the digital bus setup menu
Supports multi-channel signal correlation and flexible trigger setup in system debugging

Recommended Accessories

Model Description Typical use Image
UT-GBE-FT 100BASE-TX/1000BASE-T Ethernet test fixture Ethernet compliance testing UNI-T UT-GBE-FT Ethernet compliance test fixture boards and cables
UT-USB20-SQ-HD USB 2.0 test fixture USB 2.0 compliance testing UNI-T UT-USB20-SQ-HD USB 2.0 signal quality test fixture boards and USB cables

From R&D to design validation, the MSO6000HDP Series helps you find root causes faster and verify designs with confidence.

Explore how the MSO6000HDP Series can shorten your debug and validation cycle:

About UNI-Trend

UNI-Trend maintains an extensive product portfolio ranging from Digital Test & Measurement instruments, Field Measurement Instruments, Thermal imagers, to Environmental Testers. Our in-house developed test and measurement instruments were first shipped out in 2008. Currently, we offer Digital Oscilloscopes, AWG, Spectrum Analyzers, Bench Multi-meters, Power Supplies, DC Loads, Power Meters, LCR Meters, Micro Ohm Meters and Data loggers.

Visit instruments.uni-trend.com for more information on UNI-T T&M products.